Argon AR - B50

request a quote
Please contact us to order

An Argon Ar - B50 gas cylinder is a specific 50-liter (water capacity) industrial gas cylinder filled with pure argon (usually Argon 4.6, which stands for 99.996% purity). As an inert noble gas, argon is completely non-flammable, non-toxic, and chemically stable. The B50 cylinder is the largest and most widely used standalone cylinder on the market and is the standard supply for fixed welding stations in professional workshops and heavy industry.

Important info!

1. Industrial and continuous TIG welding (Tungsten Inert Gas)

  • Application: High-quality welding of stainless steel (RVS), aluminum, copper, titanium, and high-alloy steels in factories and construction workshops.
  • Why the B50? TIG welding constantly consumes large amounts of gas (8 to 10 liters per minute). With a net welding time of 18 to 20 hours, production does not need to be constantly interrupted for a cylinder change, which is ideal for fixed welding stations and production lines.

2. Automated and robot welding (MIG/TIG)

  • Application: Fully automatic welding robots that weld aluminum frames, stainless steel tanks, or machine parts in series production.
  • Why the B50? Robots often run for hours at a time. The large gas reserve guarantees a continuous process without downtime.

3. Large-scale backing gas / forming gas (Purging)

  • Application: Completely oxygen-free purging of the inside of long stainless steel piping systems, reactors, or large storage tanks (widely used in the food, pharmaceutical, and petrochemical industries) during welding. This prevents heavy oxidation ("cauliflower formation") on the back of the weld seam.
  • Why the B50? Purging large volumes requires a constant, high gas flow for hours. Smaller cylinders (such as B10 or B20) would empty far too quickly in this process.

4. Laboratories and analytical equipment

  • Application: As a pure carrier gas or purge gas for plasma analysis equipment (such as ICP-OES or ICP-MS) and spectrometers in metallurgical and chemical laboratories.
  • Why the B50? These devices calibrate themselves and often need to be on standby continuously under a stable gas flow.

5. Central gas supply (Coupling boards)

  • Application: In smaller factories, two or four B50 cylinders are often coupled together on a central coupling board mounted against a wall. The argon gas is then distributed to various welding stations in the workshop via fixed copper or stainless steel piping.
Product details

Argon AR gas cylinder, filled with 50L of AR, specially developed for inert atmospheres to prevent oxidation and as a filler for light bulbs (made for long-term and professional use).

  1. Transport Regulations
  2. Steel protective cap mandatory: Always screw the steel cylinder cap on completely and hand-tight. If an 80 kg cylinder falls and the valve breaks off, the 200 bar pressure escapes instantly, causing the cylinder to be launched like a rocket through the vehicle wall.
  3. Mechanical securing (Fastening): A B50 cylinder may be transported both upright and flat (as it is a pure gas and not a liquid). However, due to its heavy weight, the cylinder must be secured immovably against the bulkhead or side wall of the cargo area with heavy-duty tension straps. A loose B50 will cause havoc during an emergency stop.
  4. Ventilated vehicle: Preferably transport a B50 in an open pickup or a van with active cargo area ventilation. Transport in a closed passenger car is strongly discouraged. Should you have to transport it in a closed van, set the ventilation to maximum (no recirculation) and drive with windows slightly open.
  5. Legally required fire extinguisher: For commercial transport, an approved 2 kg powder fire extinguisher (ABC) is legally required in the vehicle and must be kept within immediate reach.
  6. Never store permanently in the vehicle: Never use your van as a storage place. In full sun, the temperature in the vehicle can rise above 60°C, which causes dangerous pressure increases in the cylinder. Always remove the cylinder from the car immediately after arrival.
Safety Data Sheet argon.docx

Safety during use and storage of the B50

Although argon is an inert, non-flammable, and non-toxic noble gas, an Argon Ar - B50 cylinder presents specific industrial risks due to its enormous pressure (200 bar) and weight (75 to 85 kg):

  • Increased risk of asphyxiation (heavier than air): A B50 cylinder contains no less than 10,000 liters of compressed gas. If the entire contents escape through a major leak in a small, enclosed space, pit, or basement, the argon sinks to the floor and silently displaces all oxygen. This leads to suffocation within seconds without you noticing it. Ensure mechanical ventilation at floor level.
  • Physical overload and falling hazard: Due to the weight of approximately 80 kg, this cylinder must never be lifted or carried manually. Move the cylinder exclusively with an approved gas cylinder hand truck and secure it immediately at the fixed welding station with a safety chain or bracket.
  • Color code & Recognition: The shoulder of the cylinder is dark green (RAL 6001) in accordance with the EN 1089-3 standard for inert gases.
  • Extreme pressure: Use only heavy-duty industrial pressure regulators specifically suitable for 200 bar argon (RU3 connection: W24.32 x 1/14" right-hand external).

Do you have any questions about our products?
Check out our FAQ.

FAQ